Smok IPX80 80W Starter Kit

Smok IPX80 80W Starter Kit for MTL Vaping

The Smok IPX80 pod system kit offers impressive battery life, tight airflow control, and lightning-fast firing speed. Want a system engineered to survive while providing a unique vaping experience? Add the Smok IPX80 Vape Starter Kit to your VaporFi shopping cart today!

To Reset the Puff Counter:

• Power On: Ensure your device is turned on.
• Access Puff Reset: Press and hold the Fire Button and the Left Adjustment Button simultaneously.
• Reset Puff Count: Continue holding until the puff counter resets to zero.​

How to Change the Coil on the SMOK IPX 80

• Remove the Pod: Gently pull the pod out from the device.
• Remove the Old Coil: Turn the pod upside down. Grasp the base of the coil and pull it straight out.
• Prime the New Coil: Apply a few drops of e-liquid directly to the exposed cotton in the new coil to saturate it.
• Install the New Coil: Align the new coil with the slot and push it firmly into place until it’s fully seated.
• Reinsert the Pod: Place the pod back into the device until it clicks into position.
• Fill the Pod: Open the fill port on the side of the pod, insert the nozzle of your e-liquid bottle, and fill the pod. Close the fill port securely.
• Wait Before Vaping: Allow the device to sit for 5–10 minutes to let the coil fully saturate with e-liquid before vaping.​

What’s Included

• 1 x IPX80 Device
• 1 x IPX80 RPM 2 Pod
• 1 x 0.16ohm RPM 2 Meshed Coil
• 1 x 0.6ohm RPM 2 DC Coil
• 1 x Type-C Cable
• 1 x User Manual